Sammying felts or Wringer felts are used on through feed sammying machines (Wringers) for take out from the hides its surplus of water and its fats, via compression between two felts (upper felt, lower felt) strong pressure is applied by several cylinders. So it’s important that our sammying felts are resistant to high pressure, good effective, without deforming and durable. It also be applied on Setting out felts after dyeing, our windrower felts with a special surface treatment that optimizes skin stretch. Our Sammying felts applicable to brand : BAUCE, 3H, CM, ESCOMAR,POLETTO, RIZZI,ROTOPIA, BARNINI,GEMATA...Etc. |
 |
|
Setting out felts & sleeves for tannery discontinuous or continuous setting out machines, two roller cover with felts sleeve or one roller with felt sleeves to squeeze out the moisture excess, and stretch, smoothen the hide in order to increase its surface before drying. Offering 30% wool / 70% synthetic or 100% Wool, our special process ensures the felt sleeves are securely bonded / fixed to the roller. |
 |
|
| Setting Out Felt for process the hide go through the two of setting out felt to drain off excess water after dyeing, to being stretch and soften. So it require a special surface treatment to make the felt surface is smooth for friendly the hide skin. Made of 100% synthetic, weight from 8500 to 9500(g/m2), thickness 17 to 18mm. Our setting out felts applicable to brand : BAUCE, CM, ESCOMAR |
 |
|
Ironing and embossing felts are used on conveying the hide during the ironing and embossing procession, under high pressure in order to provide the final look and touch to the skin. Ironing and embossing felts surface must be soft allows a constant thickness and hardness overall the surface, we offer wool mixed with synthetic + anti-static fibers , or 100% wool are suitable for all soft / thin leather to suitable for heavy to medium embossing. Material : 70% + anti-static fibers + 50% wool, or mixing with nomex to resist high temperature upto 180 ℃. Weight / Thickness : 9000 to 9500gr/m2 ( 14mm to 16mm) Our Ironing and embossing felts applicable to brand : ROTOPIA, BERGI, EvolutionTECH, BERGI, 3H, BMD, GEMETE, MOSTARDINI...Etc. |
 |
|
Embossing felt pads for hydraulic presses for ironning, pressing and printing, the leather is put on the felt pad, a ironing plate comes down to press against the skin in order to give the final touch. Hongkong Xinyun offering 100% wool, with or without bevelled edges, thickness between 20mm to 25mm. |
 |
